Worldline
Quality

Quality Control for Precision Components

Define what must be checked, how it will be verified and which records belong with your CNC parts, stamping die components or injection mold components.

01Quality

Agree the Acceptance Basis

A controlled drawing is the starting point. Identify the current revision, material specification, critical dimensions, datum references, finish and any functional checks. Resolve conflicting notes before production rather than leaving the interpretation to final inspection.

Redacted drawing features used to define an inspection scope
02Quality
Material identification and an approved document extract
01

Check the Material Basis

State the specified grade, delivery condition and required documentation. A material certificate, a hardness check and an identity test answer different questions. Confirm which records or checks are included for your order and how they connect to the supplied material.

02

Review the First Part

Where first-part approval is required, agree the sample quantity, characteristics to inspect and records to submit. Identify the approval decision that permits the next stage. A first-part check should not be described as a formal industry-specific FAI unless that scope has been agreed.

03

Control the Critical Features

Select in-process checks around the features and operations that create the project’s main risks. Record which characteristics are checked, when they are checked and what happens when a result is outside the agreed limits. Sampling and full inspection are separate decisions.

04

Inspect the Delivery Condition

Confirm whether acceptance applies before or after heat treatment, coating, polishing or other finishing work. Threads, fitting surfaces, edges and functional features may need different checks. Include cleanliness, marking or packaging requirements where they affect the delivered part.

NoteQuality

Make the Report Useful

Your inspection record should make the requirement, method and result understandable. Agree the part identification, revision, measured characteristics, units, sample basis and report format. A pass statement without a defined inspection scope gives you little basis for comparison.

03Quality

Handle Exceptions Explicitly

A non-conforming result requires an agreed disposition.

Process outline

01

Identify the affected parts, contain the issue and separate corrective work from approval to use a deviation.

02

Replacement, rework or another resolution depends on the technical assessment and the order terms; it should never be implied by a generic website promise.

04FAQ

Frequently Asked Questions

What does 100% inspection cover?

The phrase must identify both the parts and the characteristics inspected. Checking every part does not necessarily mean measuring every dimension.

Is a CMM report included with every order?

Do not assume it is. Request the required report, characteristics and sample basis at quotation stage so the inspection scope can be confirmed.

Can I use my own inspection format?

Provide the format before quotation. Its feasibility, required data and associated work must be reviewed as part of the order scope.

Does dimensional conformity establish mold performance?

Not by itself. Mold fit, movement, sealing or molding performance may require additional checks or trials under agreed conditions.

Can traceability be added after production?

Records that were not maintained may not be reconstructable. Define the required traceability level before work begins.

Can I specify critical-to-quality features?

Yes. Identify them on the controlled drawing or an agreed inspection plan, and state the required verification method or report where applicable.

Are all dimensions checked after finishing?

That depends on the agreed acceptance condition. Identify the features whose dimensions, surface or function must be verified after finishing.

Is first-part approval the same as batch acceptance?

No. A first-part approval and the release checks for a production lot serve different purposes. Define both when your project requires them.

What happens when an inspection result is outside limits?

The affected scope and disposition need to be established before release. Any acceptance of a deviation requires the appropriate written authorization.

What quality information belongs in my RFQ?

Include drawing revision, critical features, material and finish requirements, sample basis, report format and any approval hold points.

05Request

Discuss Your Requirements

Share your part type, current drawing revision and the question you need to resolve. Include the quantity and delivery destination when a quotation is required.

Kim, sales engineer at Worldline Technology

Kim

Sales Engineer

Quote response24 h business days
Working hoursMon to Sat, 8am to 6pm
WhatsApp+86 135 8522 2288
Chat With Kim

Have a confidential drawing? Describe the component first and ask for an appropriate document-sharing arrangement. Your details will be used to respond to this inquiry. Read our Privacy Notice.

Chat With Kim